Art.-No. 512144

fischer Zykon panel anchor FZP II 11 x 21 M6/SO/9 AL

Top Features
  • Stand-off installation of panels with tolerances.
  • Compensation of panel thickness tolerances for highest visual requirements.
  • For all natural stones class I-IV.
  • Stress-free fixing enables high loads and use of thin panels.
  • Sleeve made of stainless steel.

Opis izdelka

The adjusting undercut anchor made of A4 stainless steel for natural stone.
Advantages
  • Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.
  • The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
  • The fixing is not externally visible, creating a visually appealing façade surface.
  • Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
  • The anchor allows higher failure loads compared to common systems.
The concealed stand-off installation solution using A4 stainless steel undercut anchors for heavy natural stone façade panels. This technology defines a constant distance between the front of the panel to the connection level on the FZP II anchor (RWT = remaining wall thickness as a reference dimension for drilling. This technology can be used to compensate the tolerances of panel thicknesses to create a flat façade surface by using stand-off installation anchors.

Dovoljenje aplikaciji

Applications
  • Exterior façades with high aesthetic requirements
  • Interior façades with high aesthetic requirements
Building materials
  • Natural stone (>20mm)
  • Artificial concrete panels
Podroben opis najdete v priloženem dokumentu
Dovoljenja
  • ETA-11/0145
  • DoP No. 0307

Navodila uporabe

Functionality
  • The hole is drilled to a constant reference dimension for the remaining wall thickness (RWT).
  • The anchor is set through stand-off installation.
  • The compensation of panel thickness tolerances results in a completely flat façade surface.
  • Wet diamond drilling: first cylindrical, then conical - to create the undercut. #Inserting the undercut anchor in the cylindrical-conical undercut hole
  • Expanding the undercut anchor by "pressing down" the washer using the setting tools
  • Stress-free and geometrical inter-locking fixing
Mounting Strip 1 Picture
1 / 6

Tehnični podatki

ETA-approval
Min. panel thickness 20 mm
Total length (
l
)
30 mm
Thread (
M
)
M6
Cylindrical diameter (
d0
)
11 mm
Undercutdiameter (
d1
)
13,5 mm
Amount 250 pcs.
GTIN (EAN-Code) 4048962112559

Dokumenti za prenos

European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469:2015
Ustvarjeno na 22. 08. 2024
Declaration of Performance for fischer Zykon-panel anchor FZP II
Ustvarjeno na 01. 07. 2022
cd-blue-c6785f99-77wnx