Zykon panel anchors FZP II
  • Product Category Picture: "Zykon panel anchors FZP II VS"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
      The suspension anchor with the fischer Vertical Solution for natural stone or artificial concrete panels.

      Zykon panel anchors FZP II VS

      The undercut anchor for a concealed stand-off installation soution for heavy natural stone façade panels. This anchor can only be used with the fischer Vertical Solution subframe system. Suspension brackets designed based on a lock and key principle are used to install the undercut anchors. This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. Panel thicknesses are thus compensated. A completely flat façade surface is created.
      Produktne variante
      Download of image data

      Produktne variante

      Filter
      Filter
      Dovoljenja / teh.poročilo
      (0) produktnih variant (s)
      Min. panel thickness
      Total length
      Thread
      Cylindrical diameter
      Undercutdiameter
      Amount
      Legenda = Dovoljenje do— = Ni dovoljeno
      Poglej (0) od (1) rezultat (s)

      Opis izdelka

      Advantages
      • Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.
      • The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
      • The fixing is not externally visible, creating a visually appealing façade surface.
      • Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
      • The anchor allows higher failure loads compared to common systems.

      Dovoljenje aplikaciji

      Applications
      • Exterior façades with high aesthetic requirements and a reduced wall construction
      • Interior façades with high aesthetic requirements and a reduced wall construction
      Building materials
      • Natural stone (>20mm)
      Podroben opis najdete v priloženem dokumentu
      Dovoljenja
      • ETA-11/0145
      • DoP No. 0307

      Navodila uporabe

      Functionality
      • The hole is drilled to a constant reference dimension for the remaining wall thickness (RWT).
      • The anchor is installed stand-off installation.
      • The compensation of panel thickness tolerances results in a completely flat façade surface.
      • Suspension brackets designed on a lock and key principle are also used during installation
      • Wet diamond drilling: first cylindrical, then conical - to create the undercut. #Inserting the undercut anchor in the cylindrical-conical undercut hole
      • Expanding the undercut anchor by "pressing down" the washer using the setting tools
      • Stress-free and geometrical inter-locking fixing
      Mounting Strip 1 Picture
      1 / 6
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture
      • 5
        Mounting Strip 1 Picture
      • 6
        Mounting Strip 1 Picture

      Dokumenti za prenos

      ETA Certification Document
      pdf, ETA-11/0145
      European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469:2015
      Ustvarjeno na 22. 08. 2024
      DOP - Declaration of Performance
      pdf, DoP No. 0307
      Declaration of Performance for fischer Zykon-panel anchor FZP II
      Ustvarjeno na 01. 07. 2022
      cd-blue-c6785f99-s8hkv