Art.-No. 518952

fischer angle bracket MW SA A2 stainless steel A"

Top Features
  • Bracket for connecting Solar rails to STSI or STSR double-threaded screws or to connect two overlapping and 90° crossed Solar rails
  • Slotted hole on the vertical section
  • Version with long slotted hole
  • A2 stainless steel

Opis izdelka

Angle bracket for the connection between Solar rails and STSI and STSR double-threaded screws or to connect two overlapping Solar rails crossed with 90°. Version with long slotted hole.
Advantages
  • Quick installation through the bottom hole and easy adjustment through the slotted side hole.
  • The connections with the rail are provided with anti-slip knurling for secure fixing.
MW SU and MW SA are the angle brackets in A2 stainless steel for the connection of the double-threaded screws with the Solar rails or to connect two overlapping Solar rails crossed with 90°. The slotted hole on the vertical section enables the height adjustment of the Solar rail. Available in two versions, short or long, to adapt to different height requirements.
Properties
X5CrNi 18-10 stainless steel hook in accordance with EN 10088-2:2005.

Dovoljenje aplikaciji

Applications
Suitable for:
  • Corrugated sheet roof systems
  • Special structure systems
For connection with:
  • SolarFish H33
  • SolarFish H44
Direct fixing of the bracket to following substates:
  • Wood with PowerFast II wood screws
  • Concrete with FIS V Plus injection mortar and FIS A anchor rod
  • Brick and cement ceiling with FIS V Plus injection mortar, FIS A anchor rod and FIS HK injections anchor sleeve
Building materials
  • Steel beams and rails with panel thickness from 2 - 4 mm
Podroben opis najdete v priloženem dokumentu
Dovoljenja
  • TUV - R 60154136

Navodila uporabe

Functionality
Connection with STRS or STSI double-threaded screws:
  • Insert the MW connecting bracket between the two nuts of the STSR/STSI double-threaded screw and tighten them.
  • Connect the Solar rail to the MW bracket through the slotted hole using SKS M 8 screw and MU FM 8 flanged nut.
  • Use the pair of STSR/STSI double-threaded screw nuts to adjust the position of the MW connecting bracket.
Crossing of two Solar rails:
  • Connect the MW bracket to the lower Solar rail using the FCN AL hammer head nut and SKS M 8 screw.
  • Fix the upper Solar rail to the bracket through the slotted hole using SKS M 8 screws and MU FM 8 flanged nut.

Tehnični podatki

Hole-ø (
D
)
12,5 mm
Installation torque (
Tinst
)
10 Nm
Amount 10 pcs.
GTIN (EAN-Code) 8001132027608

Dokumenti za prenos

Certificate
pdf, TUV - R 60154136
TUV Certificate
Velja od 11. 01. 2021
do 11. 01. 2026
Solar systems. Mounting solutions for photovoltaic panels.
cd-green-58bb58464c-47qvg