Nail anchor FNA II
  • Product Category Picture: "Nail anchor FNA II M6 with thread and flange nut"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
      The installation-friendly hammerset anchor for multiple fixings.

      Nail anchor FNA II M6 with thread and flange nut

      The fischer nail anchor FNA II M6 with thread and flange nut is made from zinc-plated, stainless, and highly corrosion-resistant steel. The nail anchor is primarily suitable for the anchoring of ventilation systems and mounting rails. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA II M6 is set in a few hammer blows in a time-saving push-through and pre-positioned installation. Torque-controlled tightening is not required. This saves time. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.
      Produktne variante
      Download of image data

      Produktne variante

      Filter
      Filter
      Dovoljenja / teh.poročilo
      (0) produktnih variant (s)
      Anchor length
      Drill diameter
      Min. drill hole depth for through fixings
      Max. fixture thickness
      Thread
      Width across nut
      Legenda = Dovoljenje do— = Ni dovoljeno
      Poglej (0) od (1) rezultat (s)

      Opis izdelka

      Advantages
      • Easy removal of fire protection board without damage.
      • Reusability of fire protection board.
      • Safe anchorage, particularly when exposed to vibration, wind, and pushing/pulling influences.
      • Low anchoring depth (30 mm).
      • Convenient installation without torque-controlled setting tool.
      • Approved system that has proven itself one million times over.

      Dovoljenje aplikaciji

      Applications
      • Fire protection plates
      • Fire protection boards
      • Ventilation systems
      • Wire and Nonius hangers
      • Mounting rails
      • Metal clamps
      • Substructures made of wood and metal
      Building materials
      • Concrete C12/15 to C50/60, cracked and non-cracked
      • For multi-point fixings of non-load-bearing systems
      Podroben opis najdete v priloženem dokumentu
      Dovoljenja
      • ETA-06/0175
      • DoP No. 0235
      • 2006-Efectis-R0560
      • 2006-CVB-R0559
      • 2006-Efectis-R0561
      • GS 6.1/21-076-1

      Navodila uporabe

      Functionality
      • The washer significantly increases the pulling forces and, at the same time, prevents the damage of the panel during removal.
      • Removal by means of easy pinching off of nail head thanks to special 2-stage pliers.
      • For fast installation, use the compressed air setting device (item no. 093731).
      Mounting Strip 1 Picture
      1 / 4
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture
      Mounting Strip 2 Picture
      1 / 4
      • 1
        Mounting Strip 2 Picture
      • 2
        Mounting Strip 2 Picture
      • 3
        Mounting Strip 2 Picture
      • 4
        Mounting Strip 2 Picture

      Dokumenti za prenos

      ETA Certification Document
      pdf, ETA-06/0175
      European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete
      Ustvarjeno na 02. 03. 2021
      DOP - Declaration of Performance
      pdf, DoP No. 0235
      Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)
      Ustvarjeno na 16. 03. 2021
      Test report (fire protection)
      pdf, 2006-Efectis-R0560
      fischer anchor type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 RVS A4)
      Ustvarjeno na 01. 11. 2006
      Test report (fire protection)
      pdf, 2006-CVB-R0559
      fischer anchors, type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 rvs A4)
      Ustvarjeno na 01. 11. 2006
      Test report (fire protection)
      pdf, 2006-Efectis-R0561
      fischer anchor type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 rvs A4)
      Ustvarjeno na 01. 11. 2006
      Test report (fire protection)
      pdf, GS 6.1/21-076-1
      Assessment of the load-bearing behaviour of fischer nail anchors FNA II R and FNA II HCR under tension load and one-sided fire loading according to the ZTV-ING-curve
      Ustvarjeno na 05. 10. 2021
      Load Table
      pdf,
      Nail anchor FNA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.
      Podobni produkti
      cd-blue-c6785f99-7cp4w